ExLab Climate Control Considerations
Norseman’s Standard HVAC Offering
Norseman utilizes a packaged wall-mount HVAC unit as it’s standard offering for climate control in our EXLabs. Typically for extraction processes the ideal interior temperature is between 60-70°F. Norseman’s standard HVAC unit is very cost effective and will provide this stable interior atmosphere in more moderate climates. We also offer HVAC system upgrades that will provide a suitable climate in any environment.
Parameters for Considering HVAC Upgrades
The standard HVAC unit draws air directly from outdoors and has the capacity to raise or lower the temperature of intake air by 30-35°F. Therefore, if the outdoor temperature is 100°F it will be capable of achieving 65-70°F without any extraction equipment running. If the outdoor temperature is 0°F it will only be able to achieve 30-35°F.
Extreme high humidity areas can reduce the effectiveness of the standard HVAC unit. It can lower its ability to heat and cool by 5-10°F. If your local humidity levels get higher than 85% and your temps get above 90°F you might find the interior environment warmer than desired using our standard HVAC unit.
HVAC Upgrade Options
For climates where summer heat is not an issue but winters are frigid, adding ducted heaters to the EXLab will temper the cold incoming air to a more desirable level. This is the most cost-effective method of climate control because the duct heaters are very inexpensive compared to other options. Our standard HVAC unit can still be utilized.
Upgraded HVAC Unit
In climates that are outside the parameters for effective use of our standard unit and if adding heat isn’t enough, Norseman offers an upgraded HVAC unit that will control the interior temperature to within +/-2°F regardless of the exterior temperature. There are roof mounted and pad mounted versions available. These units are very efficient and Norseman’s most expensive option.
FOUR MODELS. FOUR SIZES.
Which EXLab Is Right For You?
Each of our EXLabs can be setup to accommodate multiple workstations and technicians. However, your preferred extraction method will determine which model you will need. All four models come in four sizes to fit your space and operation.
Furthermore, EXLabs are delivered fully assembled and ready to go. There is very little work to be done to connect it to your infrastructure.
8′ X 20′ 8′ X 40′ 12′ X 20′ 12′ X 40′
814 SW Evangeline Trwy, Suite 118
Lafayette, LA 70501